|
The NeoBip is a Bilevel positive airway pressure unit.It is intended for
the treatment of obstructive sleep apnea (OSA) for adult or pulmonary
Insufficiency who need respiratory support.The device is intended for
home,hospital and other institutional environment use.
This device is not intended for life support.
The device is to be used only on the instruction of a licensed health
care professional who has received operation training from the
company or other authorized organzations. Pressure settings should be
determined with the configuration of the device according to your health
care professional’s prescription.
• A BIPAP is a Non invasive therapy it a pressure controlled in a spontaneous breathing. • It is used to help you breathe easier when you have condition that make breathing difficult . • Obstructive sleep apnea is a serious condition in which your breathing stop and starts repeatedly while you are asleep. • Chronic obstructive pulmonary disease (copd) • Asthma • Obesity hypoventilation syndrome. • Heart condition such as congestive heart failure or coronary artery disease • A neurological or neuromuscular disorder that affect your ability to breathe. • Poor breathing after a medical procedure such as surgery. • The machine works by pushing the pressurized air into your lungs. • It reduces burden on respiratory muscles and lungs to inhale and exhale • The machine motor blows air through the tube certain amount of required pressure. • The pressurized air enters your body through the mask or plugs. • It eliminates need for using a ventilator that makes uses of a tube that goes down into your throat without used for tracheotomy. • A tracheotomy is a procedure to create a hole in your neck to let you breathe through the trachea.
Device Size |
Dimensions: 160 mm × 148 mm × 99.5 mm, or 247 mm × 148mm × 99.5 mm (with the humidifier) |
Weight |
0.82 kg, or 1.26 kg (with the humidifier) |
Operation, Transport and Storage |
Operation Transport and Storage Temperature 5℃ to 35℃ -20℃ to +60℃ Humidity 10% to 93% Noncondensing 10% to 93% Noncondensing Atmospheric Pressure 760 to 1060 hPa 500 to 1060 hPa |
Mode of Operation |
Continuous |
Mode |
CPAP、AUTOS、S、ST、T 、VGPS |
SD Card |
With a capacity≥8G, the SD card can record patient data and fault information. |
AC Power adapter |
Input: 100-240VAC, 50-60 Hz, 2.0 A max Output: 24Vdc, 3.33A |
Main Device |
Input: 24Vdc, 3.33A max |
Type of Protection Against Electric Shock |
Class II Equipment |
Degree of Protection Against Electric Shock |
Type BF Applied Part |
Degree of Ingress Protection |
IP22 |
Pressure Range |
AUTOS, ST, T, VGPS: 4 to 30 cm H2O (4 to 30 hPa) CPAP : 4 to 20 cm H2O (4 to 20 hPa) ≤40 hPa under single fault conditions |
Ramp time |
The ramp time ranges from 0 to 60 minutes |
Sound Pressure Level |
<30 dBA, when the device is working at the pressure of 10 hPa. |
Sound Power Level |
<38 dBA, when the device is working at the pressure of 10 hPa. |
Measurement system uncertainties |
In accordance with ISO 80601-2-70:2015 the measurement uncertainty of the manufacturer's test equipment is: For measures of flow ± 2% of the reading or 0.05Std L/min(whichever is greater) For measures of pressure ±0.5%for full scale(15.6-25.6℃),± 1.5%for full scale(0-15.6℃15.6-40℃) |
Pressure Accuracy |
Maximum static pressure variation at 10 cm H2O (10 hPa) |
Maximum Flow |
Test Pressure(hPa) 4 8 12 16 20 Average Flow at the Patient Connection Port(l/min) 91 111 120 131 123 |
Tube |
Length: 1.8m Inner diameter: 19mm |
SpO2 |
Range: 70%-100%. Accuracy: ±3%. |
Pluse Rate |
Range: 20-250BPM. Accuracy: ±3digits |
Wireless module |
Frequency range: 2,402-2,480 MHz Maximum output power: +4.0dbm Modulation: GFSK |
Wireless module |
Frequency range: 2,412-2,484 MHz Maximum output power: +20.0dbm Modulation: CCK, OFDM |
NOTE |
The bias error and the linearity error have been considered in above pressure variation |