|
The Resmed Airfit p30i is designed to keep air tubing out of signal. It quiet air vent reduces sound to 21 decibel quieter than a soft whisper. It slips on design makes it simple to put on and take off. Quick release elbow allows to get up and right and disconnect without removing the mask. The nasal pillow also rests securely in your nose which helps to keep the mask in the place as you switch sleep positions. It is exhalation pressure relief. Spring fit frame adjust to different facial profiles, helping provide a accurate fit for the time. Quiet release elbow allow patient to easily disconnect mask from tubing 360 degree rotation for greater freedom movement. Soft sleeves complement the streamline mask profile to comfortable experience. It designed to be inter chargable . septum bridge membrane ensures an intuitive fit and provides a stable steal all the way to tip of the nose through the night. It vent gently diffuses exhaled air designed to minimize noise and disturbance. The one-size-fits-all headgear has minimal touch points on the face and connects to the frame in the back of the head. The velcro straps can be adjusted and will securely stay in position all night.
• Nasal pillow mask are cushions that seal at the base of the nostrils and are help in place with a stretchy strap that goes around the back on head. • It reduce air leakage since they direct air into the patients nasal passangers. They work well for patient with a beard or mustache. • Nose breathers. • It lots of facial hair that with other mask types can prevent the mask from making seal with your skin • Active sleepers • It may cause nasal dryness or nose bleeds. • More natural airflow than nasal pillow as the deliverd pressure isn’t direct. • Better for higher pressure setting than nasal pillow. • It may experience higher incidences of nose bleeds or nasal dryness due to direct air pressure.
COMPATIBLE DEVICE |
For a full list of compatible devices for this mask, see the Mask/Device Compatibility List at SmartStop may not operate effectively when using this mask with some CPAP or bi-level devices. |
PRESSURE FLOW CURVE |
PRESSURE(Cm H2O) FLOW(L/MIN) 4 20 9 31 15 41 20 49 25 55 |
MASK SETTING OPTION For AirSense, AirCurve or S9 |
AIRFIT P30i PILLOWS |
THERAPY PRESSURE |
4 to 25 cm H2O |
RESISTANCE |
Drop in pressure measured (nominal) at 50 L/min 0.4 Cm H20 at 100L/min 1.5 Cm H2O |
SOUND |
Declared dual-number noise emission values in accordance with ISO4871:1996 and ISO3744:2010. A-weighted sound power level and A-weighted sound pressure level at a distance of 1 m, with uncertainty of 3 dBA, are shown Sound power level Sound pressure level 21 dBA 14 dBA |
ENVIRONMENTAL CONDITIONS |
Operating temperature: 41°F to 104°F (5°C to 40°C) Operating humidity: 15% to 95% non-condensing Storage and transport temperature: -4°F to 140°F (-20°C to +60°C) Storage and transport humidity: up to 95% non-condensing |
SERVICE LIFE |
The service life of the mask system is dependent on the intensity of usage, maintenance, and environmental conditions to which the mask is used or stored. As this mask system and its components are modular in nature, it is recommended that the user maintain and inspect it on a regular basis, and replace the mask system or any components |
NOTE
The manufacturer reserves the right to change these specifications without notice