+91 9115 300 300-
business@hitwinhealthcare.com
+91 9115 300 300 business@hitwinhealthcare.com
|
The Philips Respironics Innospire Essence compressor nebulizer features an Active Venturi system that provides air flow in addition to that supplied by the compressor. This results in faster drug delivery and shorter treatment times between 6-8 minutes. With Side Stream Technology and Active Venturi system, this nebulizer from Philips ensures faster and consistent delivery of medicines. Suitable for use at home or in a hospital. It has nebulization capacity of 8ml with operating flow rate of 7LPM. The machine is light weight, almost 1.4 Kg which works on 120 v power supply. The maximum flow rate and pressure ranges 9.4 LPM and 44 psi. Nebulizer cup and mouthpiece we can clean in warm water or soapy water.
• A Nebulizer is a drug delivery device that turns liquid medications into fine mist, allowing easy inhalation into lungs through mouthpiece or facemasks. • They are used for variety of healthconditions, includingCOPD,asthma, and cystic fibrosis or another lung diseases. On such conditions your healthcare provider will prescribe a medicine that you need to take through nebulizer, you will sit near by the machine and inhale the gas mixture comes from it. • Depend on the patient condition time duration and dosage of medications will varies. • To deliver a drug by nebulization, the drug first need to dispersed in liquid solution,then it use compressed air,oxygen or ultrasonic waves to break up the solutions into small aerosol particles suitable for inhalation. • Compressed air or Oxygen applied will travel at a high velocity, creating low pressure at the outlet of liquid feed tube. This pressure difference inside the liquid and outlet of the feed tube causes fluid from reservoir to be drawn up into and out of the tube (Bernoulli’s principle). • Nebulizers should be cleaned properly and air dried after every usage, or else there will be chance of forming bacteria and fungus inside the reservoir. • Nebulizer is simple as vaporizer that we used in home, only the dosage of medication and timing is more important.
|
Electricity supply |
230 V/50 Hz, 1 Amp |
|
Thermal overload protector |
Thermal fuse; functioning temperature 150 C° |
|
Compressor max. pressure |
317 kPa (46 psi) |
|
Average flow rate |
6 LPM @ 10 psig |
|
Max flow rate |
8.0 LPM |
|
Weight |
1.5 kg |
|
Size |
165 x 165 x 108 mm |
|
Noise level |
58 ±3dBA |
|
Ambient conditions Temperature Humidity |
MIN -25 °C – MAX 70 °C (-13 °F – 158 °F) |
|
Operating conditions Temperature Humidity |
MIN 5 °C – MAX 40 °C (41 °F –104 °F) |
|
Operating atmospheric pressure |
Performance may vary depending on altitude above sea level, barometric pressure and temperature |
Get a Quote
Rental
Products
Book a Demo
Whatsapp