TrueBlue Gel

Benefits & Specifications

• Designed to deliver a higher degree of comfort and stability. Including freedom of movement with minimal adjustments. Premium blue gels work with the thin, form-fitting outer silicone membrane to create an effective, self-adjusting seal.
• Premium Gel Cushion and Inflatable Silicone Flap:
 The gel cushion molds to the shape of your nose, providing a comfortable, self-adjusting seal.
 The True Blue is designed to fit loosely on the face. It is not necessary to over tighten the straps to create a seal.
 Simply position the mask and adjust the straps so the mask rests comfortably on your face.
 The loose fit allows the outer cushion silicone flap to inflate and create a seal around your nose.
 For help achieving a seal, put on the True Blue mask and connect it to your CPAP hose. Turn on your CPAP machine. While your machine is blowing, pull your mask out away from your nose, allowing the outer cushion flap to inflate around your nose. Slowly bring the mask back to its original position.

• Easy Click Cushion Re-assembly:
 The spring and gel cushion easily and quickly click together with three contact points.
• Soft, Adjustable Forehead Pad
 The forehead pad has three soft gel cushions to diffuse pressure across a larger area for increased comfort. The pad swivels up and down, offering a high degree of flexibility, easily conforming to your forehead.
• Talon Headgear Clips:
 Made of a softer plastic to withstand tension, the durable headgear clips are easy to unhook, eliminating the need to unfasten headgear straps to remove the mask. Each clip snaps into place with one click and can be twisted to detach.
• Stable Headgear:
 The four adjustable straps join together into a single back panel. Combined with a crown strap, the headgear was designed to provide stability through out the night.
 All sizes of the TrueBlue mask are packaged with the Standard sized Headgear.
• System One Resistance Control:
 If using the TrueBlue with the System One line of CPAP machines, take note of the Resistance Control rating located on the cushion of your mask. Programming this rating into a System One machine will adjust the pressure output relative to the mask in use, making your pressure more consistent and reliable.

Specifications

PRESSURE FLOW CURVE

                    

DEAD SPACE VOLUME	Petite                    88 mL Small                    108 mL Medium               108 mL Medium Wide       124 mL Large                    122 mL
SOUND LEVELS	A-weighted Sound Power Level 32 dBA A-weighted Sound Pressure Level at 1 m 23 dBA
STORAGE CONDITIONS	Temperature: -4º to 140º F (-20º to +60º C) Relative Humidity: 15% to 95% non-condensing
NOTE	The spring should only be slightly compressed when final adjustments have been made. The spring is intended to allow the mask to float and self-adjust to the face. If the mask is overtightened, it can hinder the mask’s performance and seal.  Do not overtighten the headgear.

Video

Brochures

• NAM0016-PHILIPS-TRUEBLUE-GEL.pdf